Standard Color Configuration * |
Custom Color Configuration ** |
|
Full PVC, 1 row |
|
|
Full PVC, 2 rows |
|
|
Full PVC, 3 rows |
|
|
PVC with Perforated Leather Insert 1 Row |
|
|
PVC with Perforated Leather Insert 2 Rows |
|
|
PVC with Perforated Leather Insert 3 Rows |
|
|
PVC with Quilted PVC Insert 1 row *** |
|
|
PVC with Quilted PVC Insert 2 rows *** |
|
|
PVC with Quilted PVC Insert 3 rows *** |
|
|
* Standard Color Configuration includes a single color for the seat cover, the insert, and the stitching ** Custom Color Configuration includes any color combination for the seat cover, the insert, and the stitching *** PVC with Quilted PVC Insert includes piping 1 row is typically for the front seats. 2 rows is typically for front and rear seats. 3 rows is for vehicles with a third row. |
These are an inexpensive, comfortable, high-quality upgrade for your seats. They are made specifically for your vehicle and are tight-fitting, transforming your car to make it look factory-spec.
Included in the 2-row set:
Clazzio Seat Covers are also available with a breathable perforated leather center insert with a vinyl outer portion for the sides and rears of the seat covers. Up to 15 mm of memory foam is inserted in to the bottom seat cushion and upper seat cushion to provide a comfortable ride for anyone riding in your truck or SUV.
Each order comes with full installation instructions for a DIY project. Installation takes about 2-4 hours by yourself. Having another person is recommended to help install the covers and make for a perfect fitment. You do not need to remove your seats from the vehicle.
We figure that you will have the truck for a long time coming, so a 8-10 week wait is a little time compared to the overall life of the truck. You can customize the colors of your seat covers as far as outer color, center insert color, center insert material (PVC, Perforated Leather, or Quilted PVC) and stitching color. Check the image gallery to get an idea of what colors are available for each section. See more about how custom orders work.
http://www.CarLeatherSeatCovers.com http://stores.ebay.com/Clazzio-Leather-Car-Seat-Covers Clazzio is a leather car seat cover that goes over the existing car seat without removing the original seat. Completely different from taking your vehicle to an car leather upholstery shop, but once it is installed on your seats, nobody can tell that it is a leather seat cover. So easy to install, you can do it yourself! If you are looking for cheap seat covers, as in only $450 then check us out!
Clazzio is an automotive parts manufacturer company based in Osaka, Japan established in 2006 making seat covers and other automotive parts and accessories. 11i-USA is their USA branch that is based in Torrance, California. Clazzio strives for to keep their quality high and customer satisfaction even higher. It is their philosophy that "pursuing customers' true satisfaction leads to establishing true mutual trust".
We at TruckLeather also believe in this mission by keeping open and easy communication from pre-order to post-order support.
Posted by Aron on 28th Sep 2017
I bought the full PVC set, and they are great. really gives the runner a beautiful rejuvenation inside. only things I didn't care for were the fit of the headrests. a little too loose and not as "whole covering" as i'd like. if you tilt the headrest, or use the headrest at any adjustment other than all the way down, you see the under color (i went from tan leather to black). Second issue is I have full power seats, and the cut of the lower pads for both driver and passenger would be routed/fitted better to make a more snug fit. until I modify or adjust them, you can tell they aren't stock. Has potential, just need a little refining.
-Aron
Posted by Unknown on 18th Sep 2014
Shipping was fast, the quality on these seat covers are fantastic! Installed them myself with ease and had no ripping on any of the seat covers or head rests. Instructions were well written.
Posted by John K on 31st Dec 2013
Once installed, the seat covers look amazing. They fit perfectly in every area other than the rear arm rest, and the gray (as opposed to "light gray") matches the 4Runner interior very well. That being said, I personally found this to be a very difficult installation though YMMV. By trade I'm an aviation mechanic so I am mechanically inclined. I took all the seats out. Nobody says you have to do this, but I would be very interested to know how tight you can pull the straps/ ties that go underneath the seat, from one side to the other - both on the front seats, and in the rear. They come with instructions, and between the printed ones and watching youtube videos, there are no real surprises overall. It's the shear amount of pulling, tugging, turning inside out, and smoothing that you have to do that will take a toll. Again, if you don't want it to look perfect, you won't find it that difficult. For the 4Runner (2006), the back seat-back was the most difficult part. It was tough to make the arm rest area look good. It was slightly unparallel with the rest of the seat lines.
Overall I would highly recommend these to anyone and everyone, I would just caution them that if they think they are getting it done with ease, that they MIGHT be in for a surprise.
One negative: the holes that surround the plastic headrest receptacles are purposely tight fitting so that you can't see a seam around that area. I followed the directions perfectly (printed and video) and I would say on half or more of those holes (for a total of all 5 headrests) the leather (might be a PVC area - not sure) ripped. You can barely see the rips, but they do extend out past the edge of the plastic. Hopefully they don't get bigger with time.
Posted by James Barreda on 24th Nov 2012
I am very happy with this purchase! everything worked out just right and I will always recommend this product to family and friends.