Chicago Pneumatic RCP-7583VS Air Compressor 7.5HP 80 Gal. Two Stage 3-Phase 208-230V New - 2021119393

Chicago Pneumatic RCP-7583VS Air Compressor 7.5HP 80 Gal. Two Stage 3-Phase 208-230V New - 2021119393

Chicago Pneumatic's RCP compressors are designed for durability and performance, with solid cast iron cylinder, crankshaft and valve plates, providing the strength that is required for everyday use. Aluminum head and coolers with deep fins allow for unmatched heat dissipation. Balanced pistons and crankshaft provide smoother and quieter operation. Featuring oversized main bearings and automotive style replaceable insert bearings for a durable compressor pump. All units are 100% tested at full pressure.

What our Experts Think

• Commercial‑grade two‑stage performance
  The Chicago Pneumatic RCP‑7583VS Air Compressor pairs a 7.5 HP three‑phase motor with a two‑stage pump, delivering robust and consistent air output ideal for automotive shops, fabrication bays, and heavy‑duty workshops. Designed for demanding applications, it supports tools and air‑powered equipment with high flow and pressure.
• Impressive airflow & pressure
  Producing approximately 25.3 CFM @ 100 PSI and capable of reaching up to 175 PSI, this unit gives you ample capacity for running multiple tools or continuous operations without frequent downtime.
• Durable build with cast iron pump
  A solid cast iron cylinder, crankshaft, and valve construction enhances durability and heat resistance under long runs. Deep‑finned aluminum cooling heads help dissipate heat for longer pump life.
• Large 80 Gal vertical ASME tank
  The ASME‑certified 80 gallon vertical receiver provides a large air reservoir for steady delivery and reduced cycling—helpful for tools with intermittent or peak demands.
• Built‑in safety & service features
  Includes a magnetic starter, manual tank drain, tank and safety valves, and fully enclosed belt guard for safe operation and easier maintenance.
• Industry‑ready design
  The 3‑phase 208‑230 V configuration is ideal for commercial electrical systems, making it suitable where consistent, heavy use is expected.

Q&A

Q1: What type of air compressor is this?
A: It’s a 7.5 HP, 3‑phase, two‑stage industrial air compressor with an 80‑gallon vertical ASME‑certified tank, engineered for heavy‑duty shop and industrial use.

Q2: What are the motor and power specs?
A: The unit runs on 208‑230 V three‑phase power with a 7.5 HP motor, delivering reliable performance for continuous or frequent use.

Q3: How much air does it produce?
A: It produces approximately 25.3 CFM @ 100 PSI with a maximum pressure of 175 PSI, suitable for powering multiple pneumatic tools and demanding applications.

Q4: What are the construction and durability features?
A: It features a two‑stage cast iron pump, solid cast iron cylinder, crankshaft and valve plates, and deep‑finned cooling heads for superior heat dissipation and long pump life.

Q5: What ancillary features does it include?
A: Standard features include a start/stop pressure switch, magnetic starter, manual tank drain, and fully enclosed belt guard for safety and ease of maintenance.

Q6: How large is the tank and installation footprint?
A: The 80‑gallon vertical tank offers substantial air reserve, reducing cycle frequency and supporting continuous tool use. The compressor’s footprint is roughly 39″ L × 24″ W × 77″ H. 

Maintenance Tips

• Drain moisture daily: Open the tank drain valve after each use to remove water buildup and prevent corrosion inside the tank and lines.
• Change compressor oil regularly: Replace oil at recommended intervals with the proper compressor oil to reduce wear and overheating of the pump.
• Clean or replace air filter: Inspect the intake filter frequently; clean or replace it to maintain efficient airflow and protect internal components.
• Inspect belts & pulleys: Check belt tension and condition; tighten or replace worn belts and inspect pulleys for alignment to maintain smooth operation.
• Check for leaks: Periodically inspect all fittings, hoses, and connections for air leaks and tighten or replace as needed to preserve performance.
• Monitor pressure switch & safety valves: Test the pressure switch and safety relief valves to ensure they engage at the correct settings and maintain safe tank pressure.
• Keep cooling fins & vents clear: Clean cooling fins and motor vents to prevent overheating and ensure efficient heat dissipation.
• Annual professional inspection: Have a qualified technician inspect the pump, motor, and electrical components once a year for optimal longevity and reliability.